Willie and Max Raptor Series Standard Slant Saddlebag
Item category: Motorcycles / Parts & Accessories / Luggage, Saddlebags .....Listing ID: 1747


 View Pic / Gallery
  This item has been viewed 4 times
Listing type: Buy Now Only
Quantity Available: 1
Seller location: United States
Ends within: 13 days, 23h:42m:00s
Buy Now 138.95 USD Buy Now
 
 
motorgirl ( 0 )

 
 
  • Positive feedback: 0%
  • Send e-mail to seller
  •  
    View Active Listings


    Report This Listing!

    138.95 USD Buy Now


    Raptor Series: The Raptor Series from the "traditional line" of Willie & Max products feature clean lines, stunning simplicity, that add function without taking full attention away from your bike. The Raptor bags depart from our typical roller pin buckle closure and step forward in saddlebag design withou our hook and loop securing tabs. The saddlebag have zip off yokes, removable carry handles and all have plastic reinforcing for shape retention. All bags within the Raptor series are both designed and manufactured here in the USA.

    Installation Instructions
    Saddlebags

     

    The proper measurements required for our universally fitting bags are as follows:

     

    1. Measure side to side, from the back of the saddle, (riders position) to the arm of the directional signal, and compare the width measurements of the desired Willie & Max saddlebag. This measurement should be greater than the bag width.

     

    2. Measure from top to bottom. Use the bottom of the seat pad to the top of the exhaust pipe as a reference, and allow no less than 1 inch greater than the height of the desired bag for clearance.

     

    Saddlebags are supplied with three 48-inch pieces of lace. Use one piece of supplied lace to tie two saddlebag halves together, overlap the two yokes, aligning the holes, making sure that you will have enough clearance to keep the bottom of the bag from touching the exhaust pipes. Check the clearance of the bags from the pipes with the bags loaded to ensure that touching the exhaust pipes would not occur at any time. Each yoke has multiple holes punched into them. Depending on the width and thickness of your seat, position the yokes so that they are long enough to overlap and hang without obstruction. Lace the two sides together as you would a shoe, crisscrossing the lace. Tie the ends together with a secure knot. Excess lace can be cut off. Melt the ends with a lighter to ensure that they don't unravel.

     

    Place the bags over or under your seat, (making sure that it faces forward for our slant style bags). You will be able to determine the front by looking at the bag; it should look like it leans forward. Please note that we highly recommend saddlebag supports. Your dealer should be able to help you get them, or you can use our hard mount kit HM633 or the Easy Brackets, HM655.

     

    Each half bag has multiple looped web tabs on the sides and bottom of the bags. The remaining laces can be cut to the desired length for securing the tabs to your motorcycle or your saddlebag support. This is a requirement! This secures each half bag to your motorcycle. Because our products fit a number of styles and sizes of motorcycles, we do not have specific places we recommend to secure the tabs to your bike. However, there are numerous securing points on your bike to accomplish this task.

     

    In many cases you have the option of hard mounting your saddlebags to your bike. This is accomplished by using our Universal Hard Mount Kit - HM633 or Easy Brackets, quick release hard mount kit.

    Sissy Bar Bags

     

    Sissy Bar Bags are easily attached by slipping the supplied lace through the looped web tabs on the bag and tie the lace directly to the sissy bar frame.

    Tour Packs / Max-Pax

     

    Position the Tour Pack on the luggage rack, attach the hook and loop straps securely around the sissy bar. Insert the bungee cord through the web tabs located on the bottom of the tour pack and securely wrap around the bars of the luggage rack.

    Tool Pouches

     

    The Willie & Max tool pouch is designed to be mounted under the headlight on the lower fork clamp, above the headlight on the handlebars or on the back of the bike on a sissy bar or luggage rack. To install the tool pouch, wrap the double-sided hook and loop strap around the desired surface and secure tightly.

     

    Payment Methods:
    Cash, Credit Card, Money Order/Cashiers Check, PayPal

    Ships From United States (91342)

    Shipping Costs:
    Domestic Flat Rate: 0.00 USD
    International Flat Rate: 0.00 USD

    Shipping Conditions:
    Buyer pays shipping expenses , Ships International

    Shipping Terms:

    FREE shipping in continental United States-


    INTERNATIONAL SHIPPING-Please contact for shipping price!


    Listing started: March 12, 2024 - 06:38
    Listing ends: April 11, 2024 - 06:38
    Listing ID:1747

    Item category: Motorcycles / Parts & Accessories / Luggage, Saddlebags

    BUY IT NOW ONLY LISTING


    138.95 USD Buy Now